Works on 2013 2500 with 4 link front suspension only. Will not fit 1 Ton Trucks.
2-piece rear driveshaft requires carrier bearing drop kit D5505
Will not fit dually applications
Rear axle diameter will be 3.5"" or 4"", measure before ordering
Minor trimming may be required with some tire/wheel combinations. A front bumper spacer kit (D5801) is available to gain clearance if necessary
If driveline vibration is present, some 6"" kits may require the transfer case indexing kit (D5815). See installation instructions (step 17) for fitment details.
Will work with Power Wagon models with the addition of sway bar link kit D5301. Power Wagon models came factory with a 2"" taller ride height so net lift gain will be 4"" over stock.
Gas models may require modification to the front exhaust crossover pipe on driver side when using the transfer case indexing ring
